Toshiba GA-1040 Manuale Utente

If your TCP/IP network has a gateway, and users outside the gateway print to the 
GA-1040 using TCP/IP, enter the gateway address. Obtain the correct gateway address 
from your network administrator.

—Use this option to get the gateway address automatically for printing with 

TCP/IP. This option is available only if you selected DHCP or BOOTP as the 
protocol. 

If you select a DHCP or BOOTP protocol and later change it to RARP, you must 
return to Gateway Setup and set Get Gateway Address Automatically to No. You can 
then set the address manually. This is because RARP does not support automatic 
assignment of the gateway address.

—This option is available only if you answered No to Get Gateway Address 

Automatically, or if you selected RARP as the protocol. Use this option to set the 
gateway address for printing with TCP/IP. If your network uses a gateway, you must 
change the default to a correct gateway address for your network.