Toshiba GA-1040 Manuale Utente
4
4-14
Setting up the GA-1040 from a Windows Computer
PServer Setup (NetWare Services)
The Enable PServer option must be turned on if you have a Novell server connected.
You can, however, change the PServer polling interval and then modify either Bindery
Setup or NDS Configuration.
You can, however, change the PServer polling interval and then modify either Bindery
Setup or NDS Configuration.
N
OTE
:
The terms NetWare server, Novell server, and IPX server are in common use and
are used here interchangeably to mean the server on an IPX network running Novell
NetWare networking software.
NetWare networking software.
PServer Setup (NDS Configuration)
In initial setup, the GA-1040 was connected to the network and an NDS directory
tree, with a Printer, a Print Server, and one or more Print Queue objects for GA-1040
jobs (see page 5-6), was configured. You can make any changes to that setup through
the Command WorkStation. To modify NDS Setup you may need permission to
browse the NDS tree. If access to the Print Server is restricted, you’ll need a login
password.
tree, with a Printer, a Print Server, and one or more Print Queue objects for GA-1040
jobs (see page 5-6), was configured. You can make any changes to that setup through
the Command WorkStation. To modify NDS Setup you may need permission to
browse the NDS tree. If access to the Print Server is restricted, you’ll need a login
password.
Enable NDS
Check this box if NDS has already been enabled on the network.
Change Trees...
Click to open the NDS Configuration window. This option is available only when
Enable NDS is selected.
Enable NDS is selected.
Add NDS Tree
You can have only one NDS tree, so the following process is required to change trees:
1.
Select the current NDS tree and click Remove.
2.
Select the new NDS tree and click Add.
Your new NDS tree selection automatically overwrites any previous tree
selection. If you change the NDS tree selection and there are also current
Bindery settings, you are alerted that they will be deleted. If you continue
with NDS Setup, you can replace Bindery settings afterwards. To exit NDS
Setup, choose Cancel.
selection. If you change the NDS tree selection and there are also current
Bindery settings, you are alerted that they will be deleted. If you continue
with NDS Setup, you can replace Bindery settings afterwards. To exit NDS
Setup, choose Cancel.
3.
Click OK.
The Select login user window appears.
Select User Login
1.
Select the User Login object from the display in the Select User Login window.
2.
Enter a password if necessary.
3.
Click Next.
The Select print server window appears.