Toshiba GA-1040 Manuale Utente
5
5-4
Setting up Network Servers
6.
In the Configure Novell PDS for Printer Agent dialog box, select “((NONE))”,
and click OK.
and click OK.
7.
In the Configure Port Handler dialog box, choose “Remote LPR on IP” as the
connection type, and click Next.
connection type, and click Next.
8.
For Host Address, enter the IP address of the GA-1040.
9.
For Printer Name, enter the name of the GA-1040 print connection you want users
to print to, and click Finish.
to print to, and click Finish.
This name must be either
print
or
hold
.
10.
In the Select Printer Drivers dialog box, select the printer driver for
Windows 95/98/Me/2000 and the driver for Windows NT 4.
Windows 95/98/Me/2000 and the driver for Windows NT 4.
11.
Click Continue, and click OK.
GA-1040 on a NetWare 3.x or 4.x network
The NetWise
™
software built into the GA-1040 supports the following network
operating environments:
• NetWare 4.x—Novell Directory Services (NDS)
• NetWare 3.x—Bindery services
• Servers running NetWare 4.x in bindery emulation mode
N
OTE
:
Setting up a NetWare environment correctly requires the presence and active
cooperation of the Novell network administrator. You must have administrator
privileges on the network to create new NDS or bindery objects.
privileges on the network to create new NDS or bindery objects.
The term “bindery server” is used to refer to a Novell file server running NetWare 3.x,
or running NetWare 4.x in bindery emulation mode. The term “NDS” is used to
describe components of a NetWare operating system running NetWare 4.x in native
mode.
or running NetWare 4.x in bindery emulation mode. The term “NDS” is used to
describe components of a NetWare operating system running NetWare 4.x in native
mode.
NetWare clients print to the GA-1040 through the Novell network server. Server setup
and client network setup are outlined here. Client printing setup is described in
Getting Started, and printing is described in the Printing Guide.
and client network setup are outlined here. Client printing setup is described in
Getting Started, and printing is described in the Printing Guide.