Lexmark 910 Guida Utente
64
The following are not recommended for your printer:
•
Paper with a large cotton content
•
Paper with a rough or heavily textured surface
•
Coated papers, such as erasable bond
•
Preprinted papers manufactured with chemicals that may contaminate the printer
•
Paper designed for inkjet printers
•
Deformed or damaged paper
•
Paper that is wet or has absorbed moisture
•
Paper that is punched, embossed, or perforated
•
Multiple-part forms
•
Synthetic papers
•
Thermal papers
•
Recycled paper having a weight less than 75 g/m
2
(20 lb)
Preprinted papers such as letterhead must be able to withstand temperatures up to 175°C (347°F)
without melting or releasing hazardous emissions. Use inks that are not affected by the resin in toner
or the silicone in the fuser. Inks that are oxidation-set or oil-based should meet these requirements.
Latex inks may melt.
without melting or releasing hazardous emissions. Use inks that are not affected by the resin in toner
or the silicone in the fuser. Inks that are oxidation-set or oil-based should meet these requirements.
Latex inks may melt.
Transparencies
For best results, use the following Lexmark transparencies:
These transparencies are designed to provide optimal print quality. Using other transparencies
designed for laser printers may yield unpredictable results and possibly cause damage to your printer.
designed for laser printers may yield unpredictable results and possibly cause damage to your printer.
Transparencies must be able to withstand temperatures of 175°C (347°F) without melting, discoloring,
offsetting, or releasing hazardous emissions.
offsetting, or releasing hazardous emissions.
To order transparencies in the U.S., call 1-800-438-2468. In other countries, visit
on the World Wide Web.
Envelopes
You can load up to 10 envelopes in the multipurpose feeder. Load envelopes flap side down with the
stamp area on the right. The end of the envelope with the return address area enters the multipurpose
feeder last. Do not load stamped envelopes. Before loading envelopes, fan the stack to prevent them
from sticking together. For envelope loading instructions, see
stamp area on the right. The end of the envelope with the return address area enters the multipurpose
feeder last. Do not load stamped envelopes. Before loading envelopes, fan the stack to prevent them
from sticking together. For envelope loading instructions, see
To ensure the best print quality, set Paper Type to Envelope and select the correct envelope size before
sending the job to print.
sending the job to print.
Description
Size
Part number
Professional color laser transparencies
Letter
12A5940
A4
12A5941