Lexmark 910 Guida Utente
82
27
Your printer monitors the life of your fuser. When the fuser reaches the end of its life, the printer
displays
displays
. This message indicates it is time for you to replace the fuser. For best
Press
Go
to clear the message. The
Supplies
message appears on the second line of the display to
and
messages.
The printer continues to display the
Supplies
message until you replace the fuser. To replace the
fuser, use the following steps or the instruction sheet supplied with the fuser.
Preparing for maintenance
1
Turn the printer on.
2
Follow the instructions in the table for the message your printer is displaying.
The
Preparing for Maintenance
message appears while the printer moves parts into
position. After the parts are in position, the message
Printer Ready for Maintenance
appears, followed by
Power Off to Replace Items
.
3
Turn the printer off.
Removing the fuser
1
Complete the steps in
.
2
Make sure the printer is turned off.
Primary message
Secondary message
What you should do
Select = Replace
Go = Continue
Press Select if you want to
replace the fuser now.
replace the fuser now.
Press Go if you want to wait to
replace the fuser.
replace the fuser.
Select = Replace
Press Select to replace the fuser.
Select = Replace
Go = Continue
Press Select if you want to
replace the fuser now.
replace the fuser now.
Press Go if you want to wait to
replace the fuser.
replace the fuser.
Select = Replace
Press Select to replace the fuser.