Lexmark gn2 Manuale Utente

Off
On
Auto

Temporarily stores jobs on the printer hard disk before printing. This menu only

appears if a formatted disk is installed.
Notes:

Off is the factory default setting.

The On value buffers jobs on the printer hard disk. This menu selection appears

only when a formatted disk is installed and is not defective.

The Auto setting buffers print jobs only if the printer is busy processing data

from another input port.

Changing this setting from the printer control panel and then exiting the

menus causes the printer to restart. The menu selection is updated.

On
Off
Auto

Sets the printer to process Macintosh binary PostScript print jobs
Notes:

Auto is the factory default setting.

The Off setting filters print jobs using the standard protocol.

The On setting processes raw binary PostScript print jobs.

Reports or Network Reports
Network Card
TCP/IP
IPv6
AppleTalk
NetWare
LexLink

Reports or Network Reports
Network Card
TCP/IP
IPv6
Wireless
AppleTalk
NetWare
LexLink

For descriptions and settings of the network setup menus, see the following:

Note: The Wireless menu appears only when the printer is connected to a wireless

network.

This menu is available from the Network/Ports menu:

Understanding printer menus