Lexmark gn2 Manuale Utente
Solving paper feed problems
Paper frequently jams
These are possible solutions. Try one or more of the following:
C
HECK
THE
PAPER
Use recommended paper and other specialty media. For more information, see the chapter about paper and
specialty media guidelines.
M
AKE
SURE
THERE
IS
NOT
TOO
MUCH
PAPER
IN
THE
PAPER
TRAY
Make sure the stack of paper you load does not exceed the maximum stack height indicated in the tray or on the
multipurpose feeder.
C
HECK
THE
PAPER
GUIDES
Move the guides in the tray to the correct positions for the paper size loaded.
H
AS
THE
PAPER
ABSORBED
MOISTURE
DUE
TO
HIGH
HUMIDITY
?
•
Load paper from a fresh package.
•
Store paper in its original wrapper until you use it.
Paper jam message remains after jam is cleared
The paper path is not clear. Clear jammed paper from the entire paper path, and then press .
Page that jammed does not reprint after you clear the jam
In the Setup menu, Jam Recovery is set to Off. Set Jam Recovery to Auto or On:
1
Press .
2
Press the down arrow button until Settings appears, and then press .
3
Press the down arrow button until General Settings appears, and then press .
4
Press the down arrow button until Print Recovery appears, and then press .
5
Press the down arrow button until Jam Recovery appears, and then press .
6
Press the down arrow button until On or Auto appears, and then press .
Troubleshooting
182