Lexmark K 1220 Manuale Utente
123
8.
Problem:
The message Two IPDS Sources Recycle Power displays and the printer stops.
Solution:
The SIMM for IPDS supports only LAN attached hosts or a coaxial/twinaxial
attached host. You must be trying to print from both:
attached host. You must be trying to print from both:
•
a coaxial/twinaxial attachment using a SCS adapter and either
•
a LAN attachment using a MarkNet S Token-Ring or Ethernet adapter or
•
a parallel attachment using a MarkNet Pro or MarkNet XLe.
9.
Problem:
I’m trying to set up a remote printer with a MarkNet S, MarkNet Pro, or MarkNet
XLe (named Optra) from my AS/400. When I try to print to it, I get the message:
XLe (named Optra) from my AS/400. When I try to print to it, I get the message:
“All sessions ended for device Optra”
“Bind sense code ... received for mode QSPWTR device Optra”
“Writer...did not end normally”
“Bind sense code ... received for mode QSPWTR device Optra”
“Writer...did not end normally”
Solution:
A remote output queue created using CRTOUTQ and a PSFCFG device created
using WRKAFP2 or CRTPSFCFG have the same user defined name. You must
use a unique name for the remote output queue for an ASCII device using TCP/IP
and the AS/400 Host Print Transform. This cannot be the same name used to
define the printer as an IPDS printer with WRKAFP2 or CRTPSFCFG.
using WRKAFP2 or CRTPSFCFG have the same user defined name. You must
use a unique name for the remote output queue for an ASCII device using TCP/IP
and the AS/400 Host Print Transform. This cannot be the same name used to
define the printer as an IPDS printer with WRKAFP2 or CRTPSFCFG.