Lexmark MS410 Manuale Utente

Yes
No

Specify the Zero Configuration Networking setting.

Note: Yes is the factory default setting.

Yes
No

Enable the built-in FTP server, which lets you send files to the printer using File Transfer
Protocol.

Note: Yes is the factory default setting.

Yes
No

Enable the built-in Web server (Embedded Web Server). When enabled, the printer
can be monitored and managed remotely using a Web browser.

Note: Yes is the factory default setting.

View or change the current WINS server address.

Yes
No

View or change the current DDNS setting.

Note: Yes is the factory default setting.

Yes
No

View or change the current mDNS setting.

Note: Yes is the factory default setting.

View or change the current DNS server address.

View or change the backup DNS server addresses.

Yes
No

View or change the current HTTPS setting.

Note: Yes is the factory default setting.

To access the menu, navigate to any of the following:

Network/Ports > Standard Network > Standard Network Setup > IPv6

Network/Ports > Network [x] > Network [x] Setup > IPv6

Note: This menu is available only in network printers or printers connected to print servers.

On
Off

Enable Internet Protocol Version Six (IPv6) in the printer.

IPv6 uses bigger numbers to create IP addresses.

Note: On is the factory default setting.

On
Off

Specify whether or not the network adapter accepts the automatic IPv6
address configuration entries provided by a router.

Note: On is the factory default setting.

*

 These settings can be changed only from the Embedded Web Server.

Understanding the printer menus

68