Lexmark 323 Guida All'Installazione
38
Configure for TCP/IP
Verifying the
IP settings
IP settings
1
Print another Network Setup page. Look under the “TCP/IP”
heading and make sure the IP address, netmask, and gateway
are what you expected.
heading and make sure the IP address, netmask, and gateway
are what you expected.
See “Printing setup pages” on page 35 if you need help.
Note:
On Windows
computers, click Start
Programs Command
prompt (or Accessories
Command prompt if using
Windows 2000).
Programs Command
prompt (or Accessories
Command prompt if using
Windows 2000).
2
Ping the printer and verify that it responds. For example, at a
command prompt on a network computer, type “ping” followed
by the new printer IP address (for example, 192.168.0.11):
command prompt on a network computer, type “ping” followed
by the new printer IP address (for example, 192.168.0.11):
ping xxx.xxx.x.xx
If the printer is active on the network, you receive a reply.