Lexmark 320 Manuale Utente

Push the operator panel button with a brief button press to print a network setup page 
showing the physical address of the network printer. A printer settings page prints first and 
after a few moments a network setup page prints. Save the network setup page because you 
will use it later.

You must assign an IP address, netmask and gateway to the print server in order for other 
network devices to find it on the network. 

If you have DHCP, the proper addresses are automatically assigned. To verify the 
assignment has happened, print a network setup page and make sure the IP address, 
netmask and gateway appear as non-zero.

If you don’t have DHCP, there are other methods you can use to manually assign the 
address, such as static ARP and telnet, or a setup utility.