Lexmark 34T5012 Manuale Utente

Make sure you are using paper that meets the printer specifications.

Make sure that the printer is turned off and unplugged from the wall outlet.

Warning—Potential Damage: To avoid the risk of electric shock when cleaning the exterior of the printer,
unplug the power cord from the wall outlet and disconnect all cables to the printer before proceeding.

Remove paper from the standard exit bin.

Dampen a clean, lint-free cloth with water.

Warning—Potential Damage: Do not use household cleaners or detergents, as they may damage the finish of
the printer.

Wipe only the exterior of the printer, making sure to include the standard exit bin.

Warning—Potential Damage: Using a damp cloth to clean the interior may cause damage to your printer.

Make sure the paper support and standard exit bin are dry before beginning a new print job.

Turn the printer off using the power switch, and then unplug the power cord from the wall outlet.

Remove the paper feed rollers.

Note: For instructions on how to remove and reinstall the paper feed rollers, see the setup sheet that came with
the rollers inside the compartment box of Tray 1.

Dampen a clean, lint-free cloth with water.

Clean the paper feed rollers.

Warning—Potential Damage: Do not touch the rubber. Doing so will damage the rollers.

Reinstall the paper feed rollers.

Note: Make sure to replace the worn or defective paper feed rollers.

Troubleshooting

318