Axis Communications 560 Manuale Utente

AXIS 540+/AXIS 560

101

If print data is received for a printer that is already busy, the host normally 
must wait. However, for a two-port print server it is possible to use a logical 
printer to redirect the print data to another logical printer when the target 
printer is busy. If the second printer is also busy, the host must wait until the 
target printer is ready.

Follow the instructions below to redirect PR1 print jobs to PR3, when the 
printer assigned to PR1 is busy:

1. From the print server’s internal Web page, select 

2. Select the 

PR1 tab.

3. Set the 

Physical Port parameter to LPT1.

1. Set the 

Secondary Printer parameter to PR3.

2. Set the 

Wait On Busy parameter to NO.

3. Click the 

OK button.

4. Select 

Admin | Logical Printers and the PR3 tab.

5. Set the 

Physical Port parameter to LPT2.

6. Click the 

OK button.

•  The two printers must use the same printer driver.

•  Logical Printer redirection cannot be nested. If PR3 is redirected to another logical printer, 

the print job will not be redirected if PR3 is busy. 

•  If both printers are busy, the print job will be printed on the printer that first finishes its 

active print job.