Axis Communications 560 Manuale Utente

24

AXIS 540+/AXIS 560

Client/Server Printing

Select

 Network printer instead of Local Printer in Step 2 above if your print 

server has already been installed by the administrator on another computer. 
Follow the instructions in the 

Add Printer Wizard to complete the installation.

 

Alternative Method for

LPR Printing

If you wish to print over LPR but do not wish to install 

you can do this by changing the printing protocol after having installed the 
printer using the Standard TCP/IP method, see “Windows 2000/Windows 

Once the printer is installed, follow these instructions to change the printing 
protocol:

1. Go to 

Start | Settings | Printers.

2. Double-click the installed printer.

3. Select 

Properties from the Printer menu.

4. Click the 

Ports tab.

5. Click the 

Configure Port button.

6. Click the 

LPR radio button and enter the queue name (PR1, PR2...). 

7. Click 

OK to finish.

If you have not already done so, you should perform the TCP/IP basic setup 
procedures prior to installing a printer for LPR printing.

Preparing for

LPR Printing

In the 

Control Panel, double-click the Network icon. Select the Services tab. If 

the TCP/IP Printing entry appears, then TCP/IP is already installed. Close the 

Network folder and go on to Installing an LPR printer, below.
First, prepare for LPR printing:

1. Open the 

Control Panel and double-click the Network icon. 

2. Select 

Protocols. 

3. Add 

TCP\IP Protocol. 

4. Select 

Services. 

5. Add 

Microsoft TCP\IP Printing.

•  Make sure that the 

Automatically detect and install my Plug and Play printer checkbox 

is not

 checked

•  Press 

F1 to access the Windows online help system if you need additional help when 

installing a printer/print server using this method.