Axis Communications 642 Manuale Utente
Ne
tW
ar
e
UNIX
Wi
n
d
ow
s
OS
/2
Ma
ci
ntosh
Section 9: Management & Configuration
AXIS 540/640 User’s Manual
132
Using SNMP
You can use SNMP (Simple Network Management Protocol) for
remotely monitoring and configuring of the AXIS 540/640. All major
functions for print servers are supported.
remotely monitoring and configuring of the AXIS 540/640. All major
functions for print servers are supported.
General Information
SNMP refers to a set of standards for network management, including
a protocol, a database structure specification, and a set of data objects.
The AXIS 540/640 SNMP implementation runs in TCP/IP and
NetWare (IPX) networks.
a protocol, a database structure specification, and a set of data objects.
The AXIS 540/640 SNMP implementation runs in TCP/IP and
NetWare (IPX) networks.
The management is handled by NMS (Network Management System)
software running on a host on your network. The NMS software
communicates with network devices by the means of messages, which
are references to one or more objects.
software running on a host on your network. The NMS software
communicates with network devices by the means of messages, which
are references to one or more objects.
A message can be a question or an instruction to a device, or an alarm
triggered by a specific event in a device. Objects are contained in data
bases called MIBs (Management Information Base), where MIB-II is a
standard database.
triggered by a specific event in a device. Objects are contained in data
bases called MIBs (Management Information Base), where MIB-II is a
standard database.
The AXIS 540/640 supports all relevant parts of MIB-II and of the
host resources MIB. The AXIS 540/640 also includes a private
enterprise MIB, the AXIS MIB.
host resources MIB. The AXIS 540/640 also includes a private
enterprise MIB, the AXIS MIB.