Axis Communications 642 Manuale Utente

Pagina di 168
Ne
tW
ar
e
Section 4: Setting Up - NetWare
 
AXIS 540/640 User’s Manual
 
52
 
Basic Queue-based Printing (Pure IP)
Axis print servers with software version 6.0 or later allow users to print 
in a Pure IP environment using traditional queue-based printing. If 
you prefer using NDPS as your printing method, please refer to Setup 
using NDPS
, on page 45
.
In the NetWare Pure IP environment, you must use the NetWare 
Administrator to create the printer, print server and queue objects.
Installing the
AXIS 540/640
Follow the instructions below to install the AXIS 540/640 in the 
NetWare Pure IP environment:
1. Start the Configuration Wizard from the User mode in the AXIS 
540/640 Web interface. 
2. Click your way through the Wizard until reaching the NetWare 
page. Make sure that the PSERVER_NDS parameter is set. If you 
want to change the parameter value or if the parameter value is 
empty, enter the desired values. The parameter value must include 
the tree or the preferred file server you want to login to and the 
print server name including the context. The syntax of the 
PSERVER_NDS parameter is described in PSERVER_NDS 
parameter, on page 53
.
3. Use NetWare Administrator to create and link the printer, print 
server and queue objects in the NDS tree.
4. Use the Add Printer Wizard to install the printer on your client. 
Note that only NDS queue based PSERVER printing is 
supported.
Any configuration and management of the AXIS 540/640 can be 
performed from any standard Web browser. Please refer to Using a Web 
browser
, on page 109.
In Pure IP environments, the AXIS 540/640 supports NDS queue 
based PSERVER printing or NDPS printing. Refer to Queue-based 
Printing Methods
, on page 54
 alternatively Setup using NDPS, on page 
45
.