Manualsbrain.com
  1. Manuali
  2. Marche
  3. Axis Communications
  4. 642
  5. Manuale Utente

Axis Communications 642 Manuale Utente

Scarica
Pagina di 168
Wi
n
d
ow
s
Section 5: Setting Up - Windows
 
AXIS 540/640 User’s Manual
 
58
 
Windows 95 and Windows 98
Installing TCP/IP
Printers in
Windows 95/98
Install the AXIS Print System software on your Windows 95 or 
Windows 98 client, if you have not already done so. AXIS Print 
System can be downloaded from the AXIS Online CD or from the 
Axis WWW home page at http://www.axis.com/.
To enable printing in the TCP/IP environment, you must ensure that 
the TCP/IP protocol is enabled on your client.
The set of instructions you should use to install TCP/IP printer ports 
is dictated by the IP address of your AXIS 540/640:
•
If you have an active DHCP server on the network or if you have 
already set the IP address of the AXIS 540/640 using another 
method, you should follow the installation instructions presented 
in Installing TCP/IP Printer Ports, on page 60.
•
If your AXIS 540/640 is not assigned with a valid IP address, you 
should follow the installation instructions presented in Installing 
TCP/IP Printer Ports and Setting the IP Address, on page 58.
Installing TCP/IP
Printer Ports and
Setting the IP Address
Follow the instructions below to install an AXIS Raw TCP/IP printer 
port and set the IP address of the AXIS 540/640, using AXIS Print 
System:
1. Start AXIS Print System by selecting AXIS Print System from the 
Start menu.
2. AXIS Print System starts. Select Search for newly connected print 
servers... and click Next>.
3. Read the instructions and click Next>.