Axis Communications 642 Manuale Utente
Ma
ci
ntosh
Section 7: Setting Up - Macintosh
AXIS 540/640 User’s Manual
88
Choosing a Printer
Selecting a Printer
The method for choosing a printer varies depending on which version
of LaserWriter printer driver you are using.
of LaserWriter printer driver you are using.
•
The LaserWriter 7.0 driver assumes that you use a standard Post-
Script driver, and cannot take advantage of any printer specific
features.
Script driver, and cannot take advantage of any printer specific
features.
•
The LaserWriter 8.0 driver uses PPD files that contain printer
descriptions. This gives you full control over any features your
printer might have.
descriptions. This gives you full control over any features your
printer might have.
LaserWriter 7.0
Printer Driver
Follow the instructions below to choose a printer:
1. Select Chooser from the Apple menu.
2. Click the LaserWriter icon.
3. If your network has more than one zone, click on the zone you
want. If your network has no zones, this box does not appear.
4. Click the name of the printer you want. The default AXIS
540+/542+ printer name is shown as: AXIS<nnnnnn>_<port>,
where <nnnnnn> is the last six digits of the AXIS 540+/542+
serial number, and <port> is LPT1. For example:
AXIS100086_LPT1.
where <nnnnnn> is the last six digits of the AXIS 540+/542+
serial number, and <port> is LPT1. For example:
AXIS100086_LPT1.
5. Click the Close box. This completes the configuration and closes
the Chooser.
Repeat this procedure for each Macintosh computer on the network
using the AXIS 540+/542+.
using the AXIS 540+/542+.