APC AP9290 Manuale Utente
![APC](https://files.manualsbrain.com/attachments/434134065d5c651f4d733496e262a45a75ce3ca6/common/fit/150/50/cb1a8b6f231ef4d783dd99279a1457344a0d4d6facb230ab9b5ba2f65edf/brand_logo.png)
®
USER’S GUIDE
Vertical Console Port Server
3
Installation and Configuration
Set-up and Configuration
Initial set-up
If you are not using DHCP (enabled by default) you must define three
TCP/IP settings for the VCPS before it can operate on the network:
TCP/IP settings for the VCPS before it can operate on the network:
• IP address of the VCPS
• Subnet mask
• IP address of the default gateway
How to log on
You can use either a local (serial) connection, or a remote (Telnet or SSH)
connection to access the control console.
connection to access the control console.
Use case-sensitive user name (login) and password entries to log on (by
default,
default,
apc
and
apc
for the Permanent Administrator).
To use a DHCP server to configure the TCP/IP settings for a
VCPS, see
VCPS, see
.
If you cannot remember your
login or password, s
.