Fujitsu 500 Manuale Utente
28
Inserting or removing a CD
Inserting a CD
1
Press the Eject button.
Pressing the center of the eject button opens the CD tray.
Pressing the center of the eject button opens the CD tray.
2
With the label facing left, place a CD in the center of the tray.
Point
• On some CD-ROM drives, when the PC is installed in a vertical position, you must extend stop-
pers to prevent the CD from falling.
3
Press the Eject button.
The tray slides into the drive to load the CD.
The tray slides into the drive to load the CD.
Point
• The Busy lamp lights up when the CD is loaded. Wait until the lamp goes off, then proceed to
the next operation.
Removing the CD
Confirm that the Busy lamp is off, then press the Eject button to remove the CD.
Eject button
Busy lamp
Label side
Tray