TP-LINK 24+2/24+2G Manuale Utente

Input user name and password and you can manage the switch. 

If you can not log in, check whether the network is working, check whether there is other 
user who has already logged on. (Only one user can access the switch at one time 
through TELNET.) 

No matter through TELNET or Out-of-Band Management, the users have two rights. 

 

Admin:  the control right to manage the switch 

 

Guest:    the read right for port of objects Admin visits 

When you configure the switch, if you want to move the cursor, just press W 

or S, if you want to enter an interface, just press enter. The software is very easy to use, 
just doing operation according to the prompt given by the software. 

Switch Config provides you feature parameters of the switch, you can configure them 
directly. For how to configure them, you can refer to chapter 4. Here are some notes you 
should pay attention to. Press enter you will see the following interface. 

 

Figure 6-5 

 

In the interface, you can change properties of the port you want to, including flow control, 
port security, port state, bandwidth management and PVID and so on, you also can know 
the link status, real working mode and port type. 
The link status, real working mode and port type of the switch can only be read and will 
be refreshed in 10 seconds. If the color of the link status of one port is opposite to others, 

 

 

- 25 -