Agilent Technologies 66309B Manuale Utente
![Agilent Technologies](https://files.manualsbrain.com/attachments/f20ae6efbee7636e6d0d1a481fd9e3847e3caeb5/common/fit/150/50/991587f279eee8cef3aa0a068e5c2f53d86b00e1bf17fbcbf9a87aa49d96/brand_logo.png)
177
F
Compatibility Language
Introduction
The Agilent 66111A and 66311B dc sources are programmatically compatible with the HP/Agilent
6632A, 6633A, and 6634A dc power supplies. This means that by using COMPatibility language mode
you can program the Agilent 66111A/66311B over the GPIB using COMPatibility commands.
6632A, 6633A, and 6634A dc power supplies. This means that by using COMPatibility language mode
you can program the Agilent 66111A/66311B over the GPIB using COMPatibility commands.
To switch from SCPI commands to COMPatibility commands (and vice versa), use the SYST:LANG
command, as documented in chapter 8. The language setting is saved in non-volatile memory.
command, as documented in chapter 8. The language setting is saved in non-volatile memory.
Table F-2 summarizes the COMPatibility commands. You may need to refer to the HP/Agilent Series
6632A, 6633A, and 6634A Operating Guide (p/n 5957-6360) for complete information on the
COMPatibility commands.
6632A, 6633A, and 6634A Operating Guide (p/n 5957-6360) for complete information on the
COMPatibility commands.
The rest of this appendix discusses the COMPatibility language status system, and the COMPatibility
language error codes.
language error codes.
NOTE:
For complete information on the Compatibility programming language, order the
HP/Agilent 6632A/6633A/6634A Operating manual, p/n 5957-6360.
HP/Agilent 6632A/6633A/6634A Operating manual, p/n 5957-6360.
Table F-1. COMPatibility Power-on Settings
Command
Setting
Command
Setting
DC
1 (ON)
POL
1 (normal)
DLY
8 ms (fast)
80 ms (normal)
PON
last stored value
DSP
1 (ON)
RELAY
1 (close)
ISET
0.04 A (66311B)
0.02 A (6632B)
0.008 A (6633B)
0.004 A (6634B)
0.004 A (6634B)
RLYPON
1 (close)
OCP
OFF
SRQ
0
OUT
1 (ON)
UNMASK
0
OVSET
MAX
VSET
0 V