Agilent Technologies 66309B Manuale Utente
3 - Installation
30
Inspection
Damage
When you receive your dc source, inspect it for any obvious damage that may have occurred during
shipment. If there is damage, notify the shipping carrier and the nearest Agilent Sales and Support Office
immediately. The list of Agilent Sales and Support Offices is at the back of this guide. Warranty
information is printed in the front of this guide.
shipment. If there is damage, notify the shipping carrier and the nearest Agilent Sales and Support Office
immediately. The list of Agilent Sales and Support Offices is at the back of this guide. Warranty
information is printed in the front of this guide.
Packaging Material
Until you have checked out the dc source, save the shipping carton and packing materials in case the unit
has to be returned. If you return the dc source for service, attach a tag identifying the model number and
the owner. Also include a brief description of the problem.
has to be returned. If you return the dc source for service, attach a tag identifying the model number and
the owner. Also include a brief description of the problem.
Items Supplied
The following user-replaceable items are included with your dc source. Some of these items are installed
in the unit.
in the unit.
Table 3-1. Items Supplied
Item
Part Number
Description
Power Cord
contact the nearest Agilent
Sales and Support Office
A power cord appropriate for your location.
Digital I/O
connector
connector
1252-1488
4-terminal digital plug for connecting digital I/O
leads. The connector installs in the back of the unit.
leads. The connector installs in the back of the unit.
Output connector
0360-2604
5-terminal output plug for connecting load and sense
leads. This connector installs in the back of the unit.
leads. This connector installs in the back of the unit.
DVM connector
1252-8670
3-terminal plug for DVM connections (66309B/D)
Sense jumpers
8120-8821
Jumpers that insert into output connector for local
sensing. Connect +s to +, and
sensing. Connect +s to +, and
−
s to
−
.
Line Fuse
2110-0638
2110-0773
2110-0773
3.15 AT (time delay) for 100/120 Vac operation
1.6 AT (time delay) for 220/230 Vac operation
1.6 AT (time delay) for 220/230 Vac operation
Feet
5041-8801
feet for bench mounting
User’s Guide
5964-8125
This manual. Contains installation, checkout, front
panel, and programming information.
panel, and programming information.
Cleaning
Use a dry cloth or one slightly dampened with water to clean the external case parts. Do not attempt to
clean internally.
clean internally.
WARNING:
To prevent electric shock, unplug the unit before cleaning.
Location
Figure 3-1 gives the dimensions of your dc source. The dc source must be installed in a location that
allows sufficient space at the sides and back of the unit for adequate air circulation (see Bench
Operation).
allows sufficient space at the sides and back of the unit for adequate air circulation (see Bench
Operation).