Milan Technology MIL-SM2401M Manuale Utente
94
5-4-3. Console Port Information
Console is a standard UART interface to communicate with a serial port.
The Windows HyperTerminal program can be used to link the switch with
the console port. In order to change any of these parameters, you must be
connected to the console port.
The Windows HyperTerminal program can be used to link the switch with
the console port. In order to change any of these parameters, you must be
connected to the console port.
Baud rate (bits/sec): 9600
Data Bits: 8
Parity Check: none
Stop Bits: 1
Flow Control: none
Data Bits: 8
Parity Check: none
Stop Bits: 1
Flow Control: none