Fujitsu TX200 Manuale Utente

220

Chapter 7  Installing Hardware Options

11

Connect the SCSI cable to the onboard SCSI port or the SCSI Ctrl U160 (PG-

128).

When connecting to the onboard SCSI port

When connecting to the SCSI Ctrl U160

For how to install a SCSI Ctrl U160, refer to "7.5.3 How to Install an Expansion Card" 

12

Connect the power cable to the 5-inch internal devices. 

Connect the power cable to the internal devices to which the SCSI cable is connected. 

13

Attach the ventilation system cover. 

Make sure to avoid pinching cables when attaching.

14

Attach the front and side covers.

7.7.4 How to Install the Internal Hard Disk Unit Bay 

Conversion Kit

 When the Upgrade kit 6 hard disks 2 channel (2x3) is used, the internal hard disk unit bay conversion 

kit cannot be installed.

1

Turn off the server and connected devices, and unplug all power cables from 

the outlet. 

2

Remove the side and front covers. 

3

Touch a metal part of the server to discharge static electricity. 

Onboard SCSI connector B