Manualsbrain.com
  1. Manuali
  2. Marche
  3. Fujitsu
  4. TX200
  5. Manuale Utente

Fujitsu TX200 Manuale Utente

Scarica
Pagina di 317
225
PRIMERGY TX200 S2 User’s Guide
Inst
a
llin
g hardw
are option
s
7
7.8 Installing a Parallel Port
When a parallel port is necessary, install an optional parallel port.
 For the parallel port location, refer to "1.3.2 Server (Rear View)" (pg.25).
7.8.1 How to Install a Parallel Port
1
Turn off the server and connected devices, and unplug all power cables from 
the outlet. 
2
Remove the side cover. 
3
Touch a metal part of the server to discharge static electricity. 
4
Remove the ventilation system cover.
Release the latch on the ventilation system cover and lift it up to remove. 
• When installing or removing a parallel port, turn off the server, all peripheral
devices, and any other connected devices. Also unplug all power cables from
the outlet.
Failure to do so can cause electric shock.
• Touch only the specified part of the printed circuit board. 
Failure to do so could cause injury and also damage the server.
• Be careful to avoid injury when handling the parallel port connector panel
removed from the rear of the server.
Ventilation  
system cover
Latch