Fujitsu TX200 Manuale Utente

247

PRIMERGY TX200 S2 User’s Guide

8

Con

figurin

g Hardwa

re

 a

nd utili

ties

8.2.12 Server Menu

The [Server] menu sets the server options.

table: Items on the Server Menu

Item 

Setting

Description

O/S Boot Time out

• Disabled (at the time of 

purchase)

• Enabled

Sets whether to enable or disable the OS Boot 
Monitoring function, when ServerView is installed to 
the OS. When this function is enabled, if for some 
reason booting the operating system is interrupted, 
the system will automatically restart. 
The OS Boot Monitoring function can also be 
enabled or disabled from ServerView.

Note: 
 If ServerView is not installed to the OS, be 

sure to set to [Disabled]. If the setting is 

enabled, the server may automatically turn off 

or restart improperly.

 Even when ServerView is installed to the OS, 

if starting the system while the ServerStart 

CD-ROM or DOS floppy disk is inside, be sure 

to disable the OS Boot Monitoring function. If 

the system is started with this function 

enabled, the server may automatically turn off 

or restart improperly. 

 When setting this function, refer to 

"ServerView User’s Guide" to fully learn about 

its specifications, in order to use it properly 

with the correct settings. 

Action

• Continue
• Reset (at the time of 

purchase)

• Power  Cycle

Sets the operation when the OS did not boot 
successfully within the time set with the [Timeout 
Value] setting.

Timeout Value

• 0 (at the time of purchase)
• 1–100

Sets the timeout period in minutes. 

PhoenixBIOS Setup Utility

Item Specific Help

Select Item
Select Menu

Change Values
Select > Sub-Menu

-/+
Enter

F1
Esc

Help
Exit

F9
F10

Setup Defaults
Save and Exit

O/S Boot Timeout:
   Action:
   Timeout Value:
ASR&R Boot Delay:
Power Cycle Delay:
Boot Retry Counter:
Diagnostic System:
Temperature Monitoring:
Memory Scrubbing:

CPU Status
Memory Status
Console Redirection
RomPilot

>
>
>
>

[Disabled]
[Reset]
[0]
[2]
[5]
[3]
[Disabled]
[Disabled]
[Enabled]