Fujitsu TX200 Manuale Utente

Chapter 3 OS Installation Using ServerStart

3.2 Preconfiguration Mode

In preconfiguration mode, set and save the information necessary for installation in a

configuration file on a client computer (with a CD-ROM drive and 10MB or more of

free space). Set the saved configuration file on the server for installation.

If ServerStart is not installed in the client computer where the preconfiguration mode is executed, refer

pg.54) to install ServerStart. If a

different version of ServerStart has been installed, uninstall it and install the proper version. For details

If ServerStart is started up on a computer where a different version of ServerStart is installed, the

installation wizard may not operate properly. Make sure to uninstall a different version of ServerStart.

3.2.1 Starting Up the Preconfiguration Mode

Start up the preconfiguration mode.

Start up ServerStart.

If ServerStart has already been started, it is not necessary to start it up again. If it has not, start it

up according to the following procedures:

For Windows 2000 Professional/Windows XP Professional, and if the contents of the
ServerStart CD-ROM has been copied to the computer

1. Click [Start]

→ [Programs] → [Fujitsu ServerStart] → [ServerStart].

ServerStart starts up and the [Welcome to ServerStart] window appears.

For Windows NT, or if the ServerStart CD-ROM has not been copied to the computer

1. Insert the ServerStart CD-ROM into the client computer's CD-ROM drive.

ServerStart starts up and the [Welcome to ServerStart] window appears.