Agilent Technologies FS2100 Manuale Utente

This chapter introduces you to the PCI Active Analysis Probe 
and lists the minimum equipment required and accessories 
supplied for PCI Local Bus analysis.  This chapter also contains 
information that is common to both state and timing analysis. 

Before you use the PCI  Analysis Probe  software, make a 
duplicate copy of the master diskette.  Then store the master 
diskette and use the back-up copy to configure your logic 
analyzer.  This will help prevent the possibility of losing or 
destroying the original files in the event the diskette wears out, is 
damaged, or a file is accidentally deleted. 

To make a duplicate copy, use the Duplicate Diskette operation 
in the disk menu of your logic analyzer.  For more information, 
refer to the reference manual for your logic analyzer. 

 

 

The PCI Active Analysis Probe product consists of the following 
accessories: 

•  The Analysis Probe interface hardware, which includes the 

interface circuit module. 

•  one jumper  which is installed on the circuit module. 
•  The inverse assembly and configuration software on a 3.5 

inch diskette. 

•  11 cables  
•  This operating manual