IKEA IUD6000R Manuale Utente

A “●” shows what steps are in each cycle. 

Water usage is shown in U.S. gallons/liters.

These models meet the ENERGY STAR

®

 guidelines for energy 

efficiency.

Cycle time includes dry time.

You can cancel a cycle at any time.

1. Turn the cycle control knob slowly clockwise until you hear 

water draining. Let the dishwasher drain completely.

2. Open the door.

3. Turn the cycle control knob to Off.

You can change a cycle anytime during a cycle.

1. Lift the door latch to stop the cycle.

2. Turn the cycle control knob clockwise.

3. Check the detergent dispensers. They must be filled properly 

for the new cycle.

NOTE: Turning the cycle control knob can cause the covered 
detergent dispenser section to open and release the 
detergent. Check the covered section if the cycle uses 
detergent in both sections.

4. Close the door firmly until it latches. The dishwasher starts a 

new cycle.

You can add an item anytime before the main wash starts, or the 
cycle control knob reaches Normal.

1. Lift up the door latch to stop the cycle. Wait for the spraying 

action to stop before opening the door.

2. Open the door and add the item.

3. Close the door, but do not latch it. Wait 30 seconds for the air 

in the dishwasher to warm up. This reduces the amount of 
moisture escaping from the vent when restarting a cycle.

4. Close the door firmly until it latches. The dishwasher resumes 

the cycle.

Use this cycle for hard-to-clean, heavily soiled pots, pans, 
casseroles, and regular tableware.

●

●

●

●

●

●

●

Use this cycle for loads with heavy food soils and lightly 
baked-on or dried-on food.

●

●

●

●

●

●

● 

Use this cycle for loads with heavy food soil.

●

●

●

●

●

● 

Use this cycle for loads with normal amounts of food soil. (The 
energy-usage label is based on this cycle.) 

●

●

●

●

●

Use this cycle for rinsing dishes, glasses, and silverware that will 
not be washed right away.

 

●

●