Franke Consumer Products FNE 905 XS ECS Manuale Utente

 

 

 

 

 

 

•  Before attaching the hood body, tighten the two screws Vr lo-

cated on the hood body mounting points. 

•  Hook the hood body onto the screws 12a. 
•  Fully tighten the support screws 12a. 
•  Adjust the screws Vr to level the hood body. 

 

When installing the ducted version, connect the hood to the 
chimney using either a flexible or rigid pipe ø 150 or 120mm, the 
choice of which is left to the installer. 

To install a ø 150 pipe 
•  To install the dumper 10 
•  Fix the pipe in position using sufficient pipe clamps (not sup-

plied). 

To install a ø 120 pipe 
•  To install a ø 120 mm air exhaust connection, insert the re-

ducer flange 9 on the dumper 10. 

•  Fix the pipe in position using sufficient pipe clamps (not sup-

plied). 

•  Remove any activated charcoal filters. 

 

•  Insert the connection extension pieces laterally 14.1 in connec-

tion 15. 

•  Insert the Connector 15 into the Support bracket 7.3 and fix it 

with a screw. 

•  Make sure that the outlet of the extension pieces 14.1 is hori-

zontally and vertically aligned with the chimney outlets.  

•  Connect the air outlet connection 15 to the hood body outlet 

using either a flexible or rigid pipe   ø 150 mm, the choice of 
which is left to the installer. 

•   Ensure that the activated charcoal filters have been inserted.