Chauvet 550 Manuale Utente

Pagina di 26
Legend™ 550 Spot User Manual 
23 
1/11/2010 11:36 AM
 
Setting the DMX starting address 
This DMX mode enables the use of a universal DMX controller device. Each fixture requires a "start address" 
from 1 ~ 512. A fixture requiring one or more channels for control begins to read the data on the channel 
indicated by the start address. For example, a fixture that uses 6 DMX channels and was addressed to start on 
DMX channel 100, would read data from channels: 100, 101, 102, 103, 104, and 105. Choose start addresses 
so that the channels used do not overlap, and note the start address selected for future reference. 
If this is your first time addressing a fixture using the DMX control protocol, we suggest jumping to the 
“Appendix” section and reading the heading “DMX Primer”. It contains very useful information that will help you 
understand its use. 
 
 
Legend™ 550 Troubleshooting 
Symptom 
Solution(s) 
Auto shut off 
Check fan thermal switch reset 
Beam is very dim or not bright 
Clean optical system or replace lamp 
Check voltage switch for proper setting 
Breaker/Fuse keeps blowing 
Check total load placed on device 
Device has no power 
Check for power on Mains. 
Check device’s fuse. (internal and/or external) 
Fixture is not responding 
Check Display settings for correct addressing 
Check DMX cables 
Lamps cuts off sporadically  
Possible bad lamp or fixture is overheating. 
Lamp may be at end of its life. 
Light will not come on after power 
failure 
Discharge lamps require a cooling off period before the electronics in the 
fixture can kick start it again, wait 5 ~ 10 minutes before powering up. 
Loss of signal 
Use only DMX cables 
Install terminator 
Note: Keep DMX cables separated from power cables or black lights. 
Moves slowly 
Check FasTap™ 
No light output 
Check lamp  
Stand alone mode 
This fixture features stand-alone functions. See “Menu Map” for details. 
 
If you still have a problem after trying the above solutions, please contact CHAUVET Technical 
Support at the location listed below. 
 
Technical Support 
 
Address: Service Dept. 
3000 N 29th Ct, Hollywood, FL 33020 (U.S.A.) 
Support (Email): tech@chauvetlighting.com 
Telephone: (954) 929-1115 - (Press 4) 
Fax: (954) 929-5560 - (Attention: Service) 
Website: http://www.chauvetlighting.com