Smeg SE290X-6 Manuale Utente

 

 

 

8.2.1   With type 1 mobile levers 
With the door completely open, lift the levers A of the two hinges until 
they touch the hinges B and take hold of the two sides of the door with 
both hands close to the hinges themselves. Raise the door to an angle of 
about 45° and remove it. If the hinges have not locked, repeat the 
operation, raising the levers and keeping the door slightly raised. To 
reassemble, fit the hinges B into their grooves, then lower the door into 
place, ensuring that it remains fitted into the grooves C, and lower the 
levers A. 

 

8.2.2  Removing doors with pins 
Open the door completely and insert the pins (supplied) into the holes 
from the inside. Close the door to an angle of about 45° and lift it off. To 
reassemble, fit the hinges into their grooves, then lower the door into 
place and extract the pins. If you should lose the pins, two screwdrivers 
can also be used. 

 

 

To allow thorough cleaning of the oven, the door 
gasket can be removed. Before removing the gasket, 
remove the oven door as described above. Once the 
door has been removed, lift the tangs at the corners 
as shown on the right. 
After cleaning, put the gasket back in place with the 
longest side horizontal and insert the tangs into the 
holes provided, starting with the ones at the top. 

 

52