Smeg ALFA135BE Manuale Utente
Instructions for the User
24
4. USING THE OVEN
4.1 Precautions and General Advice
When the oven is used for the first time, it should
be heated to the maximum temperature for long
enough to burn off any oily residues left by the
enough to burn off any oily residues left by the
manufacturing process.
If you have to carry out any procedures on
If you have to carry out any procedures on
foods, leave the door open for as short a time as
possible to ensure the temperautre inside the
oven does not drop far enough to impair cooking
oven does not drop far enough to impair cooking
results.
4.2 Setting the time
At first use, or after a power failure, the current time must be set. The
display will show the flashing numbers
.
To set the current time, hold down START + STOP together until the
display stops flashing.
Now press or hold down START to increment the hour display. Once the
current hour has been set, press STOP to set the minutes and increment
them as before by pressing the START button.
When the correct time is set, press the STOP button and the display will
stop flashing.
display stops flashing.
Now press or hold down START to increment the hour display. Once the
current hour has been set, press STOP to set the minutes and increment
them as before by pressing the START button.
When the correct time is set, press the STOP button and the display will
stop flashing.
4.3 Power setting
After having set the time as described above and pressed the STOP
button to confirm the setting, the display will show P8.3 (maximum power
absorption 8.3 kW) if the oven is connected to a three-phase power
supply, or P5.5 (maximum power absorption 5.5 kW) if the power supply is
single-phase.
Press START repeatedly to scroll thorugh the power absorption settings
available:
P8.3, P5.5 or P3.0 for three-phase power connection;
P5.5 or P3.0 for single-phase power connection.
After selecting the appropriate power, press STOP to confirm the setting.
button to confirm the setting, the display will show P8.3 (maximum power
absorption 8.3 kW) if the oven is connected to a three-phase power
supply, or P5.5 (maximum power absorption 5.5 kW) if the power supply is
single-phase.
Press START repeatedly to scroll thorugh the power absorption settings
available:
P8.3, P5.5 or P3.0 for three-phase power connection;
P5.5 or P3.0 for single-phase power connection.
After selecting the appropriate power, press STOP to confirm the setting.
N.B. This power setting operation only has to be carried out the first time
the oven is connected. The value set is saved and automatically used
whenever the oven is switched on after this. To modify this setting or the
time, press START + STOP together to return to the point described in
section “4.2 Setting the time”
the oven is connected. The value set is saved and automatically used
whenever the oven is switched on after this. To modify this setting or the
time, press START + STOP together to return to the point described in
section “4.2 Setting the time”