Measurement Specialties PCI-QUAD-AC5 Manuale Utente

Table 2-1. Board connector, cables, and accessory equipment 

 lists the board connectors, applicable cables, and compatible accessory products for the PCI-

QUAD-AC5. 

Connector type 

Four, male 50-pin 0.1" spaced double row connectors 

Compatible cables 

C50FE-x cable 
C50FF-x cable 

Compatible accessory products (with 
the C50FE-x cable) 

SSR-PB24 (up to 4, one cable required per PB24 board) 
 

Compatible accessory products (with 
the C50FF-x cable) 

CIO-MINI50 (four) 
CIO-SPADE50 (four) 
CIO-TERM100 (two) 
SCB-50 (two) 

The PCI-QUAD-AC5 has four 50-pin header connectors (P1 to P4). If you are connecting to SSR-PB24 
racks or equivalent, we recommend using the C50FE-x series cable (see 

). 

If you need direct access to the digital I/O, use the C50FF-x series cable to connect four CIO-MINI50 
boards, four CIO-SPADE50, two SCB-50 boards, or two CIO-TERM100 terminal accessory boards. Any 
of these bring all I/O connections out to convenient, easy-to-use screw terminals. 

When installing the ribbon cables, thread them through the bracket on the end of the board. 

Information on signal connections 
General information regarding signal connection and configuration is available in the Guide to Signal 
Connections (available at 

. 

The pin out for the four I/O connectors is listed in Fi

. 

2-4