GE 200D8074P044 Manuale Utente

NOTE: Turning the refrigerator off via the controls on the touch panel does not shut off electrical power to the
refrigerator.

Unplug the refrigerator.

The bulbs are located at the top 

of  the compartment, inside the light shield.

On some models, a screw 

at the front of  the light shield will 

have to be removed. On other models, the

screw is located in the pocket located at the

back of  the shield.

To remove the light shield, on some models,

press in on the tabs on the sides of  the

shield and slide forward and out. On other

models, just slide the shield forward and

out.

After replacing the bulb with an appliance

bulb of  the same or lower wattage, replace

the light shield and screw. When replacing

the light shield, make sure that the tabs at

the back 

of  the shield fit into the slots at 

the back of  the light shield housing.

Plug the refrigerator back in.

This light is located above the top drawer.

Unplug the refrigerator.

Lift the light shield up and pull it out.

After replacing the bulb with an appliance

bulb of  the same or lower wattage, replace

the shield.

Plug the refrigerator back in.

Unplug the refrigerator.

Remove the shelf  just above the light

shield. (The shelf  will be easier to remove if

it is emptied first.) Remove the screw at the

top of  the light shield.

To remove the light shield, press in on the

sides, and lift up and out.

Replace the bulb with an appliance bulb

of  the same or lower wattage, and

reinstall the light shield. When

reinstalling the light shield, make sure

the top tabs snap securely 

into place. Replace the screw.

Reinstall the shelf  and plug the

refrigerator back in.

15

Unplug the refrigerator.

The bulb is located on the dispenser under

the control panel.

Remove the light bulb by turning

it counterclockwise.

Replace the bulb with a bulb of  the

same size and wattage.

Plug the refrigerator back in.

Tabs

Your light shield will look like
one of the following:

Pocket