Toshiba u300 Manuale Utente

User’s Manual

6-13

Power and Power-Up Modes

or if available
Swipe your fingerprint on the sensor if you have already registered the 

fingerprint with the Fingerprint utility and enabled Fingerprint Power on 

Security. If you would not like to swipe your finger or cannot authenticate 

the fingerprint for some reasons, push the BkSp key to skip the fingerprint 

authentication screen. You can try to swipe the fingerprint up to five times. 

If you failed fingerprint authentication more than five times, you must enter 

the password manually to start the computer.

Power-up modes 

The computer has the following power-up modes: 

■

Boot Mode: Computer shuts down without saving data. Always save 

your work before you turn the computer off in boot mode. 

■

Hibernation Mode: Data in memory is saved to the hard disk. 

■

Standby Mode: Data is maintained in the computer's main memory. 

Hot keys 

You can use hot keys Fn + F3 to enter Standby Mode and Fn + F4 to enter 

Hibernation Mode. Refer to Chapter 5, 

 for details. 

Panel power off/on

You can set up your computer so that power turns off automatically when 

you close the display panel. When you open the panel, power turns on in 

Standby Mode or Hibernation Mode but not in boot mode. 

System Auto Off 

This feature turns the system off automatically if it is not used for a set 

duration. The system shuts down in Standby Mode or Hibernation Mode in 
Windows

®

. 

 and