Toshiba u300 Manuale Utente

4-28

User’s Manual

Operating Basics

If you are using Fast Ethernet LAN (100 megabits per second, 

100BASE-TX), be sure to connect with a CAT5 cable or higher. You cannot 

use a CAT3 cable. 
If you are using Ethernet LAN (10 megabits per second, 10BASE-T), you 

can connect with a CAT3 cable or higher. 

Connecting LAN cable 

To connect the LAN cable, follow the steps below. 
1. Turn off the power to the computer and to all external devices 

connected to the computer. 

2. Plug one end of the cable into the LAN jack. Press gently until you hear 

the latch click into place. 

3. Plug the other end of the cable into a LAN hub connector. Check with 

your LAN administrator before connecting to a hub. 

Disconnecting LAN cable 

To disconnect the LAN cable, follow the steps below. 
1. Pinch the lever on the connector in the computer's LAN jack and pull 

out the connector. 

2. Disconnect the cable from the LAN hub in the same manner. Check 

with your LAN administrator before disconnecting from the hub.