Toshiba RAV-SM1100UT-E Manuale Utente

17

In the display example, all indicators are displayed for the explana-
tion.

In reality only, the selected contents are indicated.

• When turning on the leak breaker at the first time, [SET

DATA] flashes on the display part of the remote controller.
While this display is flashing, the model is being automatically
confirmed. Accordingly, wait for a while after [SET DATA]
display has disappeared, and then use the remote controller.

Displayed during setup of the timer.

The selected operation mode is displayed.

Displayed while the protective device works or a
trouble occurs.

Timer time display
Time of the timer is displayed.
(When a trouble occurs, the check code is dis-
played.)

When pushing the Timer SETIN button, the
display of the timer is selected in order of [OFF]

 

→ 

 [OFF] repeat OFF timer 

→ [ON]

 

→ No display.

If “FILTER 

” is displayed, clean the air filter.

Displayed during a test run.

Displays flap position.

Displayed during up/down movement of
the flap.

Set up temperature display
The selected set up temp. is displayed.

Remote controller sensor display
Displayed while the sensor of the remote
controller is used.

PRE-HEAT display
Displayed when the heating operation
starts or defrost operation is carried out.
While this indication is displayed, the
indoor fan stops or the mode enters in
LOW.

No function display
Displayed if there is no function even if
the button is pushed.

The selected air volume mode is dis-
played.

(AUTO)
(HIGH)

(MED.)

(LOW)

Display 
section

Operation 
section

UNIT

SET

CL

SETTING

UNIT No.

CODE No.

TEST

SET DATA

R.C.

No.

SETTING

UNIT  No.

CODE No.

TEST

SET DATA

R.C.

No.