Philips HTS7201/12 Manuale Utente

32

Play audio from home theater

Play the audio from a connected device through 

your home theater.

1

 Press  (Home).

2

 Select 

[Setup], and then press OK.

3

 Select 

[EasyLink] > [System Audio 

Control] > [On], and then press OK.

•

To play the audio from the TV 

speakers, select [Off], and skip the 

following steps.

4

 Select 

[EasyLink] > [Audio Input Mapping], 

and then press OK.

5

  Follow the instructions on the TV to map 

the audio of the connected device to the 

audio inputs on your home theater.

Note

 

•

If you connect your home theater to the TV 

through an HDMI ARC connection, make sure 

that the TV audio is mapped to the ARC input 

on your home theater.

Control devices

Control the home theater and the other 

connected HDMI-CEC compliant devices with a

single remote control.

One-touch play

If you enable One-touch play, the TV

automatically switches to the correct channel 

when you play a disc in your home theater.
One-touch standby

When you press and hold   (Standby) on the 

remote control, the home theater and all the 

connected HDMI-CEC devices (that support

one-touch standby) switch to the standby

mode.

If one-touch standby is enabled on your home

theater, you can switch to standby with the 

remote control of the TV or other HDMI-CEC

devices.
System Audio Control

When you play a device that has its audio 

output routed to the home theater, the home 

theater switches to the corresponding audio 

source automatically.

To use one-touch audio, turn on System Audio

Control and follow the instructions on the TV 

to map connected devices to the audio input 

connectors of the home theater.
Audio Input Mapping

connector (see ‘Play audio from home theater’

on page 32).

EN