Philips 37 Guida Al Software
→
Upgrading starts automatically
→
The display shows “Updating firmware, please wait……” .
A progress bar appears
→
Center will reboot itself twice during the upgrading process
→
After about 5 minutes, Center returns to HD mode. The upgrading is
completed
(Note: - Keep your Center turned on during the upgrading.)
(Note: - Keep your Center turned on during the upgrading.)
Upgrade WAS5 Station:
3. Press STANDBY-ON to turn WAS5 Station
3. Press STANDBY-ON to turn WAS5 Station
→
Upgrading starts automatically
→
The display shows “Updating firmware, please wait……” .
A progress bar appears
→
Station will reboot itself twice during the upgrading process
→
After about 5 minutes, Station returns to HD mode. The upgrading is
completed
(Note:
(Note:
- Keep your Station turned on during the upgrading.)
Helpful hints:
- To check the firmware version, see Preparation: Verifying firmware
version.
- If you have any problem, see
.