Lexmark 1200 Guida All'Installazione
48
Install memory and network options
Installing
adapters
You can install the following adapters in your printer:
•
Internal network adapter
•
Tri-port adapter
•
Parallel port adapter
An internal network adapter (INA), such as the
MarkNet
MarkNet
TM
S, lets you connect the printer to a local area
network (LAN). MarkNet S adapters support the follow-
ing topologies:
ing topologies:
•
Ethernet 10BaseT and 10Base2
•
Ethernet 10/100BaseTX
•
Token-Ring
The tri-port adapter provides connectors for the following:
•
Serial interface (RS-232C or RS-422), which can also
serve as a receive-only fax port
serve as a receive-only fax port
•
LocalTalk network
•
An infrared adapter
The parallel port adapter provides an additional
parallel port. Its 1284C connector requires a 1284 A–C
cable. You can purchase a 3 m (9.8 ft) cable meeting these
specifications from Lexmark.
parallel port. Its 1284C connector requires a 1284 A–C
cable. You can purchase a 3 m (9.8 ft) cable meeting these
specifications from Lexmark.
Refer to the documentation that came with your adapter
for more information.
for more information.
Note:
Depending on your
printer model, you may already
have an Ethernet INA installed in
connector 1.
have an Ethernet INA installed in
connector 1.
There are two adapter connectors on your system board:
connector 1 and connector 2. Both connectors support net-
work, tri-port, and parallel port adapters.
connector 1 and connector 2. Both connectors support net-
work, tri-port, and parallel port adapters.
You can install up to two adapters in any combination. If
you install two tri-port adapters, your printer can support
two serial ports (but only one receive-only fax port), one
LocalTalk port, and one infrared port.
you install two tri-port adapters, your printer can support
two serial ports (but only one receive-only fax port), one
LocalTalk port, and one infrared port.
If you are installing one adapter, install it in connector 1.
You can then easily install a second adapter in connector 2.
If you already have an adapter installed in connector 2
and you want to install a second adapter, you must first
remove the adapter in connector 2, and then install the
adapters in connector 1 and connector 2 in sequence.
You can then easily install a second adapter in connector 2.
If you already have an adapter installed in connector 2
and you want to install a second adapter, you must first
remove the adapter in connector 2, and then install the
adapters in connector 1 and connector 2 in sequence.
Connector 1
Connector 2