Lexmark C770 Istruzione Sull'Installazione
30
IPDS Printer and Host Setup Guide MVS Coax Printing Using the Adapter for SCS
4.
MVS Coax Printing Using the Adapter for SCS
With both the optional "Card for IPDS/SCS/TNe" and the optional "Coax/Twinax Adapter for SCS" installed, the
printer can receive, process, and print AFP/IPDS print jobs over a Coax connection.
printer can receive, process, and print AFP/IPDS print jobs over a Coax connection.
Some printers do not support the Coax/Twinax Adapter for SCS. Refer to
to determine if your printer supports the adapter. Note that no MFPs support Coax printing.
The information below will lead you through the steps for setting up the mainframe and printer to print IPDS
jobs over a direct Coax connection using the optional Coax/Twinax Adapter for SCS. Refer to the IPDS User’s
Guide for detailed instructions on using the control panel to select and change option settings.
jobs over a direct Coax connection using the optional Coax/Twinax Adapter for SCS. Refer to the IPDS User’s
Guide for detailed instructions on using the control panel to select and change option settings.
Steps
The following steps must be completed to begin printing IPDS jobs.
1
2
3
4
5
6
7
8
9
10
Step 1
Enable IPDS Printing on the Adapter for SCS (For Reference Only)
When coax-attached, the Adapter for SCS will use the IPDS emulation if the IPDS emulation is installed.
To disable or enable IPDS printing, use the control panel MENU/Menus.
1
From a Ready state press the MENU button (printers). Use the navigation buttons or icons
to scroll
to Option Card Menu.
2
On printers, press the Select button .
3
Navigate to SCS MENU 1 (or SCS MENU 2) > IPDS Options > IPDS Enable.
4
Use the navigation buttons to scroll through the values. Select Yes or No as required.
5
Save/Submit the value.
6
Power the printer OFF and ON to activate the changed setting.