Lexmark C770 Guida Alla Connessione
Printing guide
Page 2 of 3
Page 2 of 3
Loading the multipurpose feeder
You can use the multipurpose feeder one of two ways:
•
Paper tray—As a paper tray, you can load paper
or specialty media in the feeder with the intention
of leaving the media in the feeder.
or specialty media in the feeder with the intention
of leaving the media in the feeder.
•
Manual bypass feeder—As a manual bypass
feeder, you can send a print job to the feeder
while specifying the type and size of media from
your computer. The printer then prompts you to
load the appropriate print media before it prints.
feeder, you can send a print job to the feeder
while specifying the type and size of media from
your computer. The printer then prompts you to
load the appropriate print media before it prints.
To load the multipurpose feeder:
1 Open the
multipurpose feeder.
2 Squeeze the paper
guide lever and slide
the guide all the way
toward the front of
the printer.
the guide all the way
toward the front of
the printer.
3 Flex the sheets back
and forth to loosen
them, and then fan
them. Do not fold or
crease the print
media. Straighten the
edges of the stack on
a level surface.
them, and then fan
them. Do not fold or
crease the print
media. Straighten the
edges of the stack on
a level surface.
4 Arrange the stack of
paper or specialty media correctly for the size,
type, and print method you are using.
type, and print method you are using.
5 Place the paper or
specialty media, print
side up, along the left
side of the
multipurpose feeder,
and then push it in as
far as it will easily go.
side up, along the left
side of the
multipurpose feeder,
and then push it in as
far as it will easily go.
Do not force the
media.
media.
Note: Do not
exceed the maximum stack height.
Overfilling the feeder may cause jams.
Overfilling the feeder may cause jams.
6 Squeeze the paper
guide lever and slide
the guide until it lightly
touches the side of the
stack.
the guide until it lightly
touches the side of the
stack.
7 If you are loading a
different type of media
than was previously
loaded in the tray,
change the Paper Type
setting for that tray on the operator panel.
than was previously
loaded in the tray,
change the Paper Type
setting for that tray on the operator panel.
Loading other input options
For information about loading other input options, see
the Software and Documentation CD that came with
the printer.
the Software and Documentation CD that came with
the printer.
Set Paper Type and Paper Size
If you have set Paper Type and Paper Size to the
correct values, any trays containing the same type and
size of paper are automatically linked by the printer.
correct values, any trays containing the same type and
size of paper are automatically linked by the printer.
Note: If the type of the media you are loading is
the same as the media previously
loaded, you do not need to change the
Paper Type setting.
loaded, you do not need to change the
Paper Type setting.
To change the Paper Type and Paper Size setting:
1 Press
on the operator panel.
2 Press
until you see
Paper Menu
, and then
press .
3 Press
until you see
Paper Size/Type
,
and then press
.
4 Press
until the
appears next to the source
you want, and then press
.
5 Press
until the
appears next to the media
size you loaded, and then press
.
6 Press
until the
appears next to the media
type you loaded, and then press
.
Submitting selection
appears on the
operator panel.
7 Press
until the printer returns to the
Ready
state.