Lexmark c750 Manuale Supplementare

Remove the duplex tray. 

Remove any jams and then reinstall the tray.

Make sure all printer covers, doors, and trays are closed. 
Press Go to resume printing. 

The following illustrations show areas in the printer where jams can 
occur. 

Clear the paper path. If the jam error message persists, go on 
to step 2.

Open both the upper right and the lower right access doors.

The fuser assembly may be hot. Let it cool 
before continuing.

Pull down the latches. They slide toward the center to release 
the fuser.

Pull the fuser out of the printer, and set it on a clean flat 
surface.

Unsnap the housing and set it aside.

Lift up the fuser roller cover and remove the jam. 

Close the fuser roller cover.

Snap the housing back onto the fuser.

Insert the fuser back into the printer. 

Slide the latches out, and then pull up to refasten them.

Close the doors.

For information about clearing this type of jam, launch the Lexmark 
C750 Publications CD, click Troubleshooting, and look for 
Clearing image transfer unit jams.

Open the rear door of the 5-bin mailbox. 

Pull the jam straight out, and then close the door.

Turn the printer off and then back on.

Contact your administrator or Help desk if you need more 
assistance.

Multipurpose feeder

Left access door
(beside tray 1)

2000-sheet drawer

500-sheet drawer

Mailbox

Upper right

access door

(redrive area)

Lower right

access door

(fuser area)

Duplex tray

Front 
access door

Standard tray
(Tray 1)

Duplex
mechanism

500-sheet tray

2000-sheet tray