TallyGenicom 2365 Guida Utente

Specifies the transmission speed of the Ethernet interface.

Press EthSpeed (3) key.

Setting Options: Auto-Sense, 10Mbit Half, 10Mbit Full, 

Default Setting: Auto-Sense

Auto-Sense: The transmission speed is detected automatically.

10Mbit Half: Sets the transmission speed to 10 MBit half duplex per 
second.

10Mbit Full: Sets the transmission speed to 10 MBit full duplex per 
second.

100Mbit Half: Sets the transmission speed to 100 MBit half duplex 
per second.

100Mbit Full: Sets the transmission speed to 100 MBit full duplex 
per second.

It is recommended that the ethernet interface transmission 
speed setting of the printer and the connected transmission 
device coincide. The printout of the current menu settings 
contains the ethernet link status (item EthConnected).

Confirm the setting by pressing the Set key (1).

Press the Next key (4) to leave the parameter group Interf.. Press 
the Next key (4) again to access the next group of parameters.