TallyGenicom 2365 Guida Utente
User guide
The Menu
89
Activation of automatic sheet
feeder (AutoASF)
feeder (AutoASF)
This parameter only appears if an optional automatic sheet feeder is
installed. This feature is only available for the option ASF-R. It reg-
ulates the activation of automatic sheet feeders when there is no
more paper left in one of them.
installed. This feature is only available for the option ASF-R. It reg-
ulates the activation of automatic sheet feeders when there is no
more paper left in one of them.
The single sheet feeders front (ASF-F) and rear (ASF-1/2, two
bins) are available as options for some printer models only.
bins) are available as options for some printer models only.
Press AutoASF (3) key.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: Off/On
Default Setting: Off
Default Setting: Off
If an ASF is installed and the Off parameter is activated, only the se-
lected source is supported (either via the menu or an ESC se-
quence). If the selected paper source is empty, printing stops.
lected source is supported (either via the menu or an ESC se-
quence). If the selected paper source is empty, printing stops.
If an ASF is installed and you select On, the printer will load paper
from the other source if the selected one is empty.
from the other source if the selected one is empty.
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
(4) to access the next group of parameters.
AutoTra
AutoASF
Online
Setup
2
1
3
4
Back
Next
AutoASF=Off
*
Online
Setup
Set
<
>
Exit
2
1
3
4