Lexmark 2300 Manuale Utente
50
Setting up a network printer with the peer-to-peer
method
method
With this method, the printer driver is fully installed on each client
computer. Network clients retain control of driver modifications. The client
computer handles the print job processing.
computer. Network clients retain control of driver modifications. The client
computer handles the print job processing.
1
Follow the instructions on the Lexmark 2300 Series Setup sheet to
install the hardware and software on the host computer.
install the hardware and software on the host computer.
2
From the host computer, Click Start
Æ Settings Æ Control Panel.
3
Select Network and Dial-up Connections.
4
Select the network connection.
5
Click Properties.
6
Make sure a check mark appears next to File and Printer Sharing
for Microsoft Networks.
for Microsoft Networks.
If no check mark appears, click the box next to File and Printer
Sharing for Microsoft Networks.
Sharing for Microsoft Networks.
7
Click OK.
8
From the client computer, insert the All-In-One software CD.
9
Follow the instructions on the client computer screen.
10
Select USB cable when asked how the All-In-One is connected to
the computer.
the computer.
11
Select Peer to Peer when asked how the All-In-One is connected to
the network.
the network.
12
Repeat steps 8 through 11 for each of the client computers.