Lexmark C710 Istruzione Sull'Installazione
13
Removing a memory card
Removing a
memory card
Complete the following steps if you need to remove a
memory card. Otherwise, go to “Flash Memory Option”
on page 14, “Attaching a hard disk” on page 20, “Install-
ing adapters” on page 22, or “Installing the EMI shield
and rear cover” on page 28.
memory card. Otherwise, go to “Flash Memory Option”
on page 14, “Attaching a hard disk” on page 20, “Install-
ing adapters” on page 22, or “Installing the EMI shield
and rear cover” on page 28.
Warning!
Memory cards are
easily damaged by static elec-
tricity. Touch something metal
before you touch a memory
card.
tricity. Touch something metal
before you touch a memory
card.
1
Push the latches at each end of the connector away
from the card as shown.
from the card as shown.
2
Gently pull the card out of the connector.
3
Place the card into the original packaging.
If you do not have the original packaging, wrap the
card in paper and store it in a box.
card in paper and store it in a box.
4