Lexmark C710 Istruzione Sull'Installazione
20
Hard disk option card
Hard disk
option card
Two hard disk options are available from Lexmark:
•
A Hard Disk already installed on a hard disk
adapter.
adapter.
•
A Hard Disk Adapter for installing a user pur-
chased hard disk.
chased hard disk.
Warning!
The hard disk and
adapter must be installed in
option 3 on the system board.
option 3 on the system board.
If you have a hard disk already installed on a hard disk
adapter, continue with “Installing adapters” on page 22.
Otherwise, continue with “Attaching a hard disk”.
adapter, continue with “Installing adapters” on page 22.
Otherwise, continue with “Attaching a hard disk”.
Attaching a
hard disk
Use your adapter card with a third-party hard disk that
meet the following criteria:
meet the following criteria:
–
2.5-inch platter
–
ATA-2 (IDE) interface
–
Maximum thickness of 13 mm (.51 in.)
–
2.1GB minimum hard disk capacity
–
4GB maximum hard disk capacity
You need a number 2 Phillips screwdriver to attach the
hard disk to the adapter.
hard disk to the adapter.
To install and attach the hard disk:
1
Align the connector pins on the end of hard disk
with the connector on back of the adapter card.
with the connector on back of the adapter card.